Indoor Cannabis Growing Too Big? How To Stop Them?

This article seeks to inform and assist you in marijuana-related concerns. Specifically, it enlists steps to take care of tall-growing cannabis stems. The guide takes you through valuable highlights so that you can benefit better. 

Maintaining The Height Of Indoor-Grown Cannabis 


Have you been searching for ways to handle tall and massive cannabis growth? If you are curious, read through the following points to discover answers. 

  • Choose your strain wisely  

It is best to start with the strain and seed type to estimate plant height and grow room dimensions. 

Seed genetics play a pivotal role in deciding the height of a particular cannabis plant. 

If you wish to operate in a low-key manner, you may select Indica strains as they are usually small and compact. While on the other hand, if you want to set up a tall marijuana cultivation, go for Sativa strains. 

  • Adjust Light As Per Requirements 

Choose your lighting type and placement.

As important as selecting the right lighting is, positioning them correct is equally necessary. Placing them too close can cause burns and fire.

Placing them far away will cause them to grow further up. However, when choosing to maintain a small plantation, placing the light closer is suitable. 

Also, in this case, constant vigilance for any potential burn marks is mandatory. 

  • Trim And Settle The Height 

When your plants are in the vegetative growth cycle stage, look for any additional upward growth. If you find some, trim them off to cancel overgrowth. 

Hence, pruning is quite popular among home marijuana growers. Although, do not over-prune as it will likely cause damage. 

You can also change the sleep schedule to 12 hours off and 12 hours on, which will cause the plants to get into the flowering stage. This will help to regulate the plant size accordingly as desired. 

  • Low-Stress Training Is A Must 

This training involves taming your plant by bending it to limit the excessive height. This also enables the plant parts to receive equal light. 

The best way to tame them is to attach strings or enclose them within a cage. 

However, the barricade you put your plantation in must be spacious enough to avoid growth block. 

  • Check For The Temperature Levels 

It is necessary to detect the temperature setting that can lead to overgrowing. 

Certain plants that are exposed to low day temperature and higher night temperature stay small and compact. 

  • Take Notice Of The Triggers 

Install fans in the grow room. 

You can turn them on during the day to replicate the outdoor climate condition. This will cause a shift in the temperature and trigger stress in plants. 

The typical response during stress is increased stem breadth and strength. This way, one can avoid upward growth and control plant height. 

When you go seed shopping, make sure that the seller is credible and genuine. 

If you follow through with the strategies mentioned above, you can efficiently manage your cannabis production as you desire. 

First-Time Indoor Grower Guide 101: Things To Consider 


When you decide to grow plants, you must plan out a shopping list for relevant purchases. However, before you hit the street or make a virtual purchase, you need to consider specific factors. If you are interested in finding out more, scroll down. 

  • Space 

Before you decide to choose the cannabis strain you want to go for, determine the growing area space. 

A cannabis plantation requires maximum space for optimal growth. Therefore, if you plan on indoor cultivation, you need to assess if your grow room is compatible enough. 

Otherwise, you need to select an appropriate grow tent for your outdoor plantation. In addition, it is necessary to choose a well-ventilated room in case of indoor cannabis growth. 

This is because a room plantation requires particular climate and odor modifications. 

  • Wattage 

When there is a decision to grow an indoor cannabis plantation, sufficient lighting is necessary. Without adequate light, a plant will not survive for long. 

There are many options to choose from, such as high-intensity discharge lights (HIDs), T5, and LED grow lights. It is not necessary to buy the costliest, but it is important to ascertain a quality purchase. 

Decide the wattage of light you require and choose a type according to preferences. 

HIDs are great for sunlight-like effect. LED grow lights offer multiple benefits and consume less power. T5 grow lights have a lower intensity and do not produce too much heat.  

  • Circulation 

Plants require constant fresh air circulation to thrive. This demands you as a grower to accommodate appropriate measures. 

Fresh air is a necessity to regulate the temperature and humidity levels in a grow room. 

Also, if there is no exhaustion of stale air, it can cause a lack in Co2 production and damage plant growth. Fresh air further adds strength to the branches for a healthy marijuana plantation. 

  • Environment 

Any plant is highly sensitive to sound or environmental changes. Any problems in the surroundings can directly cause negative consequences on the growth. 

A grow room with too high or low humidity, and temperature levels is an open invitation to pests and molds. Extreme moisture can lead to plant rotting and stagnancy. 

Unacceptable or damaging environmental settings can cause plant stress and ruin the final result.  

  • Routine 

Opt for an environment controller to eliminate lousy growth. It is not possible for a human to sit through the entire day turning the grow lights on and off. 

Are you used to forgetting or skipping time-related tasks? Well, in this case, your cannabis plantation will eventually go stagnant if you let the lights on 24/7! 

Plants require the lights on and off as per their sleeping schedule. This pattern occurs as per the growth cycle stage they are in. 

With an environment controller, you can set the desired timing and stay rest assured. These timers come in a lot of types which depends on the crop kind. 

  • Productivity 

When you decide to go for marijuana cultivation, it is critical to opt for a suitable growing system. This basically means that you need to select whether you are going to use soil or other alternatives for the growth process. 

Soil systems are the most trusted, old-school technique of growing a plant. However, the growth efficiency is limited and comparatively slower. 

The hydroponic system requires you to simply place the nutrients in a water container for feeding the plants. 

Moreover, this technique requires constant attention. This is because overwatering and rotting can occur if the plants are kept in the reservoir for long. 

  • Cost 

All purchases require a pre-determined budget estimate to eliminate unnecessary costs. 

The primary of all costs is the electricity bills that require regulation to avoid excessive financial drain. So, you need to assess how much power consumption your grow room shall require and purchase accordingly. 

Also, choose a light that can give you optimal benefits in the long term for overall cost-efficiency. Do not consider solely upfront service costs. 

Want a reliable hack to cut down on huge bills when growing? Choose energy-efficient lights and maintain room circulation and temperature levels.

Additional Factors

Although, it is essential to research more thoroughly for a comprehensive understanding. When you plan an equipment list, you must consider your business goals, aim, and requirements. 

For an indoor grow, reflective materials, grow lights, fans, ducting, and Co2 provisions are deemed vital. For efficiency, you can opt for measuring devices, fast-germinating seed varieties, and other advanced tools. 

Have you been searching for advanced seed types for optimal productivity? Then, you can check out the Homegrown Cannabis Co.’s collection of marijuana seeds.